You are here:Home » About Us
Pet Shrinkable film for shrink sleeve

Pet-film-for-shrink-sleeve

Our shrinkable film is a polyester film that adheres to an assortment of packaging. It is typically used for labeling of containers made from materials such as PET, PS, PE, glass, and cans. Some of the characteristics are…

Optically Excellent – The clarity of this film enables eye catching graphics when printed.
Great Processibility – This film has a uniform thickness and is dimensionally stable. It is a high performance film that works very well in the printing, slitting, sealing and labeling processes. Post processing, this film maintains its profile which results in an outstanding finished product.
Superb Stability at Room Temperature – These films will not shrink when stored, or transported at room temperature thus saving on special transport, or cooling bills.
High Temperature Resistant – At high processing temperatures, the stable characteristics of this film are evident. Whether used as a label, or cap seal the end product is one that can be depended on to meet, or exceed expectations of quality.

Specification:
1) Thickness: 40-50μ
2) Width: 500-2000mm
3) shrinkage:high and medium shrinkage
4) Standard export pallet packing
5) Applications:electrical insulation

The technical data as below
Pet Shrinkable film for shrink sleeve thickness
Pet Shrinkable film for shrink sleeve tensile strength
Pet Shrinkable film for shrink sleeve modulus of elasticity
Pet Shrinkable film for shrink sleeve coefficient of friction
Pet Shrinkable film for shrink sleeve surface wetting tension
Pet Shrinkable film for shrink sleeve heat shrinkage

公称厚度 公制
NOMINAL THICKNESS 40~50µm METRIC UNITS
性能 测试方法 单位 标准值 典型值
PROPERTY TEST METHOD UNIT STANDARD VALUE TYPICAL VALUE
平均厚度偏差
AVERAGE THICKNESS TOLERANCE ASTM D374 JIS K7130 % ±3 ±3
拉伸强度 ≥60
TENSILE STRENGTH MD TD ASTM D882 JIS K 7127 Mpa ≥250 65
280
断裂伸长率 ≥500
ELONGATION MD TD ASTM D882 JIS K 7127 % ≥50 530
100
弹性模量 ≥1000
MODULUS MD TD ASTM D882 JIS K 7127 Mpa ≥3800 1200
4200
热收缩率
HEAT SHRINKAGE MD TD 85℃/10S % ≤5.070~80(包含 70) 2.5
73
摩擦系数(内面/外面)
C.O.F(IN/OUT) ASTM D1894E JIS K 7125 µs/µk ≤0.65/0.55 0.55/0.50
雾度
HAZE ASTM D1003 JIS K 7105 % ≤8.0 5.5
ASTM D2457 JIS K 7105 -- ≥100 102
润湿张力
WETTING TENSION ASTM D2578 JIS K 6768 mN/m 40 40